Filter
Top Products
3-32 Agilent B2200 User’s Guide, Edition 2
Front Panel Operation
Setup Menus
CONFIG Displays the sub menu that provides the following functions.
• ADDRESS
Displays the following message.
GPIB Address = Address
Press the arrow key to set the desired GPIB address. Then, press the
Enter key to
make the setup effective, or press the
Exit key to cancel changing the setup.
• REVISION
Displays the following message.
X.XX.XX
where X.XX.XX shows the firmware revision.
To return to the previous menu, press the
Exit key.
• UNIT
Displays the following message.
Slot#: model, X
where # is 1, 2, 3, or 4, model is the model number of the module, X is the
revision of the module.
To display another message, press the arrow key.
To return to the previous menu, press the
Exit key.
SCAN Displays the following message.
NO
Press the arrow key to set YES. Then, press the
Enter key to detect and set the input
couple ports automatically, or press the
Exit key to cancel this operation. The input
couple ports will be the input ports the Kelvin cable is connected.