Filter
Top Products
Agilent B2200 User’s Guide, Edition 2 3-27
Front Panel Operation
Front Panel Keys
Bias Mode Sets the bias mode ON or OFF.
When the bias mode is set to ON, the LCD shows which input port is the bias port,
and the input bias port will be connected to the bias-enabled channels that are not
connected to other input port. And LEDs will be turned red to show the bias port
connections.
Ch Mode (Shift+
Bias Mode)
Sets the channel configuration mode AUTO or NORMAL.
Changing the mode will reset the Agilent B2200 settings.
Couple Mode Sets the couple mode ON or OFF.
When the couple mode is set to ON, the LCD shows which input ports are the
couple port.
Gnd Mode (Shift+
Couple Mode)
Sets the ground mode ON or OFF.
When the ground mode is set to ON, the LCD shows which input port is the ground
port, and the input ground port will be connected to the ground-enabled channels
that are not connected to other input port. And LEDs will be turned red to show the
ground port connections. The ground enabled input ports are also connected to the
input ground port. Nothing must be connected to the ground enabled input ports.
Rule Displays the following message. Selects the connection rule FREE (plural route
connections) or SINGLE (single route connection).
FREE
Sequence
(Shift+Rule)
Displays the following message. Selects the connection sequence
Break_Before_Make, Make_Before_Break, or No_Sequence.
Break_Before_Make
Load Memory Displays the following message. Used to select the Agilent B2200 setup data stored
in the internal memory, and loads the data.
Settings: 01 [ ]
Save Memory
(Shift+
Load Memory)
Displays the following message. Used to select the internal memory to store the
Agilent B2200 setup data, and stores the data. Up to eight setup data can be saved.
Settings: 01 [ ]
Open All Displays the following message. Press the arrow key to set YES, and then press the
Enter key to open all relays.
NO