Filter
Top Products
Agilent B2200 User’s Guide, Edition 2 3-37
Front Panel Operation
Setup Menus
LED Displays the sub menu that provides the following functions.
• EXECUTE
Starts the LED matrix test, and displays the following message.
DIAG:LED All LED in Orange?
Press the
Enter key if the all LEDs are lighted in orange. The test result will be
recorded as PASS.
If you find any problem, press the
Exit key. The test result will be recorded as
FAIL.
Finally, press the
Exit key to return to the previous menu.
• RESULT
Displays the test result. Press the
Exit key to return to the previous menu.
PEN Displays the sub menu that provides the following functions.
Before starting the light pen test, connect the light pen to the Agilent B2200.
• EXECUTE
Starts the light pen test, and displays the following message.
DIAG:PEN Point any cross point
Point the light pen to the point you desire and confirm the LCD display. For
example, if you point the input 5-to-output 10 cross point of the Agilent B2200
in the auto configuration mode, the following message must be displayed.
SLOT: 0 INPUT: 5 OUTPUT:10
Continue this for all cross points. After that, press the
Enter key for the normal
operation. The test result will be recorded as PASS.
If you find any wrong response, press the
Exit key. The test result will be
recorded as FAIL.
Finally, press the
Exit key to return to the previous menu.
• RESULT
Displays the test result. Press the
Exit key to return to the previous menu.