Filter
Top Products
Agilent B2200 User’s Guide, Edition 2 3-11
Front Panel Operation
Operation
To Set Remote Display Mode
This instruction enables or disables the data display in the GPIB remote condition.
See “RMT_DSPL” on page 3-33.
LCD
1. Press the Menu key. The setup menu will be displayed on the LCD.
2. Move the cursor to RMT_DSPL, then press the
Enter key.
3. Move the cursor to LCD, then press the
Enter key.
4. Press the arrow keys to set the remote display mode ON or OFF.
5. Press the
Enter key to make the setup effective, or press the Exit key to cancel
changing the setup.
LED matrix
1. Press the Menu key. The setup menu will be displayed on the LCD.
2. Move the cursor to RMT_DSPL, then press the
Enter key.
3. Move the cursor to LED, then press the
Enter key.
4. Press the arrow keys to set the remote display mode ON or OFF.
5. Press the
Enter key to make the setup effective, or press the Exit key to cancel
changing the setup.
To Return to Local Mode
Press the Local key. If the front panel keys are locked, send the :SYST:KLC
command from an external computer, then press the
Local key.