Filter
Top Products
Agilent B2200 User’s Guide, Edition 2 5-17
SCPI Command Reference
Command Summary
[:ROUT]:AGND:UNUSED card_number,'enable_port'
[:ROUT]:AGND:UNUSED? card_number
Ground-enables the specified input ports for the
specified card.
card_number: 0 or ALL for Auto Config,
1, 2, 3, 4, or ALL for Normal Config
enable_port: One or more input port numbers: 1 to
8. Enclose by single quotation marks. Separate
multiple input port numbers by comma. For
example: '1,5'
Query returns the ground-enabled input port
numbers for the specified card.
card_number: Card to check. 0 for Auto Config,
1, 2, 3, or 4 for Normal Config.
Couple Mode Commands
[:ROUT]:COUP:PORT card_number,'couple_port'
[:ROUT]:COUP:PORT? card_number
Specifies the input couple ports for the specified
card.
card_number: 0 or ALL for Auto Config,
1, 2, 3, 4, or ALL for Normal Config
couple_port: One or more input port numbers: 1, 3,
5, 7, 9, 11, or 13. Enclose by single quotation
marks. Separate multiple input port numbers by
comma. For example: '1,5'
Query returns the lower input port number of each
couple pair for the specified card.
card_number: Card to check. 0 for Auto Config,
1, 2, 3, or 4 for Normal Config.
[:ROUT]:COUP:PORT:DET Detects the input ports connected to Kelvin cable,
and assigns them as the input couple ports for the
all cards.
[:ROUT]:COUP[:STAT] card_number,state
[:ROUT]:COUP[:STAT]? card_number
Sets the couple mode for the specified card.
card_number: 0 or ALL for Auto Config,
1, 2, 3, 4, or ALL for Normal Config
state: ON / 1 (
mode ON)
or OFF / 0 (mode OFF)
Query returns the mode status of the specified card:
0 (OFF) or 1 (ON).
card_number: Card to check. 0 for Auto Config,
1, 2, 3, or 4 for Normal Config.
Command Description