Filter
Top Products
3-10 Agilent B2200 User’s Guide, Edition 2
Front Panel Operation
Operation
To Read Error Message
1. Press the Menu key. The setup menu will be displayed on the LCD.
2. Move the cursor to ERROR, then press the
Enter key.
3. Move the cursor to DISPLAY, then press the
Enter key to display the message.
4. Press the arrow keys to read another error message. A maximum of four error
messages can be stored.
To clear error buffer
1. Press the Menu key. The setup menu will be displayed on the LCD.
2. Move the cursor to ERROR, then press the
Enter key.
3. Move the cursor to CLEAR, then press the
Enter key. The LCD displays NO.
4. Press the arrow key to display YES, then press the
Enter key to clear the error
buffer, or press the
Exit key to cancel operation.
To Set Beeper
1. Press the Menu key. The setup menu will be displayed on the LCD.
2. Move the cursor to BEEP, then press the
Enter key.
3. Press the arrow keys to select the beep ON or OFF.
4. Press the
Enter key to make the setup effective, or press the Exit key to cancel
changing the setup.
To Set GPIB Address
1. Press the Menu key. The setup menu will be displayed on the LCD.
2. Move the cursor to CONFIG, then press the
Enter key.
3. Move the cursor to ADDRESS, then press the
Enter key.
4. Press the arrow keys to set the GPIB address.
5. Press the
Enter key to make the setup effective, or press the Exit key to cancel
changing the setup. To be effective the new address, reboot the Agilent B2200.