Filter
Top Products
Agilent B2200 User’s Guide, Edition 2 5-45
SCPI Command Reference
:SYSTem:CDEScription?
:SYSTem:CDEScription?
This query command returns a description of the specified card.
Syntax :SYSTem:CDEScription? card_number
Query response "card_description" <newline><^END>
If the designated card is not installed or initialize failed, this command returns
"No Card".
For B2200A:
• In the Auto Config mode, "card_description" response is one of following:
• "B2210A 14x12 Femto Leakage Switch Module"
• "B2210A 14x24 Femto Leakage Switch Module"
• "B2210A 14x36 Femto Leakage Switch Module"
• "B2210A 14x48 Femto Leakage Switch Module"
• In the Normal Config mode:
"B2210A 14x12 Femto Leakage Switch Module"
For B2201A:
• In the Auto Config mode, "card_description" response is one of following:
• "B2211A 14x12 Low Leakage Switch Module"
• "B2211A 14x24 Low Leakage Switch Module"
• "B2211A 14x36 Low Leakage Switch Module"
• "B2211A 14x48 Low Leakage Switch Module"
• In the Normal Config mode:
"B2211A 14x12 Low Leakage Switch Module"
Example OUTPUT @Agb2200;":SYST:CDES? 1"
ENTER @Agb2200;A$
Parameter Explanation
card_number For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4