Filter
Top Products
5-46 Agilent B2200 User’s Guide, Edition 2
SCPI Command Reference
:SYSTem:CPON
:SYSTem:CPON
This command resets the specified card. Status after this command is shown below:
Channel Configuration: Not changed.
Connection Rule: Free
Connection Sequence: Break Before Make
Bias Mode: Off
Bias Input Port: 10
Bias-enabled Channels: All channels (output ports) are bias-enabled.
Couple Mode: Off
Couple Input Port: Cleared.
Ground Mode: Off
Ground Input Port: 12
Ground-enabled Channels: Cleared.
Ground-enabled Ports: Cleared.
Card Channel Status: All relays are opened.
Self-Test Result: Not changed.
Input Port Symbol String: Not changed.
Output Port Symbol String: Cleared.
For the device reset state, see *RST.
Syntax :SYSTem:CPON card_number
Example OUTPUT @Agb2200;":SYST:CPON ALL"
Parameter Explanation
card_number For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL