Filter
Top Products
Copyright © 2007 • MCL Technologies • All Rights Reserved
www.mcl-collection.com
Chapter 3 : Creating a Project
3.5.2. Auxiliary Communications
General introduction This section describes the auxiliary communications settings in order for
your 123 Print project to be able to communication with peripherals
connected serially to your Datamax printer.
Setup To enter auxiliary communications setup, you must first have a project
open. Then,
Click the System Setup button
on the left-hand
side of the main window or on the menu bar:
1 Click Project
2 Click System Setup
If using a graphical display printer, on the System Settings screen:
3 Click the Aux Com button
The Aux Com Settings window is displayed as shown here
Com 1 is the default port for barcode scanning.
Type allows you to define how you want the scanned data to be saved
in the buffer for your 123 Print application
4 Choose the appropriate type from the drop down list as shown
below
October 2007 Page
116