Filter
Top Products
Copyright © 2007 • MCL Technologies • All Rights Reserved
www.mcl-collection.com
Chapter 7 : Deploying a Printer Project
7.2. Printer Status
General introduction This section describes the printer status given by 123 Print.
The 123 Print status is a read-only status. You can not modify any of
the information shown on these screens.
Printer Status To see the printer’s status:
1 Connect the printer to 123 Print
2 Click on the Printer Status icon found on 123 Print tool bar.
The printer status screen is displayed as shown here.
The printer information given means the following:
Model
The Datamax printer model to which 123 Print is connected
Part number
Please reference your Datamax documentation
Product level
Please reference your Datamax documentation
Firmware version
This is the version of your Datamax firmware
Firmware date
This is the date of creation of your Datamax firmware
MCL version
This is the version of the MCL-Client on your Datamax printer
MCL date
This is the date of creation of the MCL-Client on your Datamax
printer
October 2007 Page
187