Filter
Top Products
Copyright © 2007 • MCL Technologies • All Rights Reserved
www.mcl-collection.com
Chapter 5 : Using Processes
5.6.4. Print Label
General introduction The Print Label process allows you to initiate the print of any label
included in your project. You can initiate the print to occur
On the printer where your project is running.
On a printer connected to the printer where your project is running
(cascading printers).
Print label To initiate a label print, proceed as follows:
1 Add the process Print Label to your label program
2 In the Printer Port box, identify the port you want to print on
Select Internal if you want to print on the printer where your
project is running
Select one of the other ports if you want the label to print on
a secondary printer
3 In the File box, select the label you want to print from the drop list
of labels. This list includes all the labels available in your project.
4 Click the Mapping button and make any necessary changes to the
mapping of the label you want to print. This launches the same
mapping function as that described in Section
3.3.3 – Mapping.
5 Click OK
October 2007 Page
154