Filter
Top Products
Copyright © 2007 • MCL Technologies • All Rights Reserved
www.mcl-collection.com
Chapter 7 : Deploying a Printer Project
7.4.9. Load DPL Control
DPL Control action To load a DPL Control into the selected printer:
1 Put the printer into DPL Mode
Note: DPL Control commands should be sent with the printer in DPL
Mode to be sure the printer’s DPL engine receives the command
properly for control handling and execution.
2 In 123 Print, select the DPL Control action
A dialogue box is displayed giving DPL Command load options as shown
here
DPL command
options
123 Print offers a list of preset DPL Commands for you to choose from.
These are the most commonly used DPL commands. Note: These
preset actions are the same commands as provided by DMX Loader.
3 Select the predefined DPL command you want to load in the
printer
Alternatively, if you want to execute a DPL command that is not
provided in the preset DPL command list:
4 Choose the User DPL Command option
A dialogue box is displayed as shown below. This allows you to write
your own DPL command to be sent to the printer.
October 2007 Page
205