Filter
Top Products
Sprint SmartView Settings 103
Sprint SmartView Settings
● Automatically log into a VPN when you connect to a specific network. (See “Auto
Launch” on page 103.)
Use existing VPN profile
Select this option if the VPN client software you will be using is supported by Sprint
SmartView. Then, specify the supported VPN client software and the Login Profile that you
want to use. (See
“Supported Clients” on page 62 for more information on supported VPN
client software.)
Use third party VPN client
Select this option if the VPN client software you will be using is not supported by Sprint
SmartView, and then follow these steps:
1. Click Browse.
2. Select the program file to be launched.
3. Click Open. The path of the selected file should now appear in the Command line field.
4. If the VPN client software requires that additional parameters be included after the
program filename on the command line, these may be entered in the
Parameters field.
Consult the documentation for the VPN client to determine if such parameters are
needed.
See “Supported Clients” on page 62 for more information on which VPN client software is
supported.
Auto Launch
Select this check box if you want new Network Profiles created to automatically launch the
VPN software specified above each time you connect. Note that this is only a default. You
can change this setting for an individual profile by selecting or clearing the
VPN Auto
Launch check box on the General tab of the properties for the desired profile. (See
“Automatically Launching a VPN Connection” on page 64 for more information.)