Filter
Top Products
Network Profiles 69
Network Profiles
4. If you selected WEP-SHARED or one of the WPA or WPA2 methods that have “PSK” in
their names, you must enter the encryption key for this network in
Network key and
Confirm network key fields.
If you selected one of the WPA or WPA2 methods that don't have “PSK” in their
names, you must configure 802.1x Authentication. Follow these steps to enable 802.1x
Authentication when connecting to this network:
a. Select the Enable 802.1x authentication check box.
b. Select the EAP Type from the EAP type dropdown menu.
c. Click Properties to configure the settings for the selected EAP type.
If you selected “WEP-OPEN” as the authentication method, you can either enter an
encryption key in the
Network key fields or complete the 802.1x Authentication section.
Automatic Profile Creation Settings
If you wish, Sprint SmartView can automatically create network profiles for each new WiFi
network you successfully connect to. The setting that controls this can be found by
selecting
Automatic Profile Creation from the Settings menu in the Network Profiles window.
Choose from the following options:
● Automatically save all networks that I connect to – Sprint SmartView will create a new
profile for every new WiFi network you successfully connect to.
● Prompt me before saving network settings – Sprint SmartView will ask you if you want
to create a new profile each time you successfully connect to a new network.
● Allow manual input of network settings only – Sprint SmartView will not automatically
create network profiles.