HP (Hewlett-Packard) 8600 All in One Printer User Manual


 
The printer cannot read photos on the memory device
Check the memory device
The memory device might be corrupt.
Solve wired (Ethernet) network problems
TIP: You can visit the HP online support website at www.hp.com/go/customercare
for information and utilities that can help you correct many common printer
problems.
If you are unable to connect the printer to your wired (Ethernet) network, perform one
or more of the following tasks.
NOTE: After correcting any of the following, run the installation program again.
General network troubleshooting
General network troubleshooting
If you are unable to install the HP software provided with the printer, verify that:
All cable connections to the computer and the printer are secure.
The network is operational and the network hub, switch, or router is turned on.
All applications, including virus protection programs, spyware protection programs,
and firewalls, are closed or disabled for computers running Windows.
The printer is installed on the same subnet as the computers that use the printer.
If the installation program cannot discover the printer, print the network configuration
page, and enter the IP address manually in the installation program. For more
information, see
Understand the network configuration page.
Solve wireless problems
This section provides information about solving problems you might encounter when
connecting the printer to your wireless network.
Follow these suggestions in order, starting with those listed in the "Basic wireless
troubleshooting" section. If you still encounter problems, follow the suggestions
provided in the "Advanced wireless troubleshooting" section.
This section contains the following topics:
Basic wireless troubleshooting
Advanced wireless troubleshooting
After resolving the problems
Wireless Direct Printing
Update the printer
TIP: For more information about troubleshooting wireless problems, visit
www.hp.com/go/wirelessprinting.
Chapter 9
136 Solve a problem