Filter
Top Products
This section contains the following topics:
•
Create a firewall rule
•
Change the priority of firewall rules
•
Change firewall options
•
Reset firewall settings
•
Limitations to rules, templates, and services
Create a firewall rule
To create a firewall rule, complete the following steps:
1. Open the embedded web server. For more information, see
Embedded web server.
2. Click the Settings tab, click Firewall Rules.
3. Click New, and then follow the onscreen instructions.
NOTE: After clicking Apply, the connection to the EWS might be temporarily disrupted for a
short period of time. If the IP address was unchanged, the EWS connection will be enabled
again. However, if the IP address was changed, use the new IP address to open the EWS.
Change the priority of firewall rules
To change the priority in which a firewall rule is used, complete the following steps:
1. Open the embedded web server. For more information, see
Embedded web server.
2. Click the Settings tab, click Firewall Rules Priority.
3. Select the priority in which you want the rule to be used from the Rule Precedence list, with
10 having the highest priority and 1 having the lowest priority.
4. Click Apply.
Change firewall options
To change firewall options for the printer, complete the following steps:
1. Open the embedded web server. For more information, see
Embedded web server.
2. Click the Settings tab, click Firewall Options.
3. Change any settings, and then click Apply.
NOTE: After clicking Apply, the connection to the EWS might be temporarily disrupted for a
short period of time. If the IP address was unchanged, the EWS connection will be enabled
again. However, if the IP address was changed, use the new IP address to open the EWS.
Reset firewall settings
To reset the firewall settings to the factory defaults, restore the printer’s network settings. For
more information, see
Solve network problems.
Limitations to rules, templates, and services
When creating firewall rules, note the following limitations to rules, templates, and services.
Item Limit
Maximum number of rules. 10 (one default rule)
Maximum number of Address Templates. 12
Maximum number of user-defined address
templates.
5
Maximum number of services you can add to
a user-defined service template.
40
Change advanced network settings 221