3. Slide the media guides in the tray to adjust them for the media size that you have
loaded, and then reinsert the tray.
4. Pull out the extension on the output tray.
Load cards and photo paper
To load cards and photo paper
Use these instructions to load photo paper.
1. Pull out Tray 1.
2. Insert the media print-side down in the center of the tray. Make sure the stack of
media aligns with the line on the width guide, and is not higher than the paper stack
line on the guide.
NOTE: Do not load paper while the printer is printing.
Chapter 1
26 Get started