Filter
Top Products
Drive Error Codes 113
Drive Error Codes
The following error codes may be reported in bytes 16 and 17 of the Request
Sense data. See the
REQUEST SENSE
command in Chapter 4 of the SCSI
Interface, Volume 3 of the HP Ultrium Technical Reference Manual.
Generic Module (from 0000h)
Automation Control Interface (from 0400h)
Code Description
0000h Good
0001h Bad
0003h Aborted
0004h Invalid configuration values
0005h Invalid configuration name
Code Description
0401h Invalid command opcode
0402h Busy—command rejected
0403h RAMBIST failed
0404h Invalid command checksums
0405h Invalid baud rates
0406h Invalid command while load/unload pending
0407h Time-out waiting to end immediate command
0408h RAM framing error
0409h RAM overrun error
040Ah Invalid command length
040Bh Byte buffer framing error
040Ch Byte buffer overrun error
10