Filter
Top Products
126 Drive Error Codes
Non-Volatile Data Manager (from 4000h)
Error Description
4002h Invalid parameter
4003h Data length exceed table length
4004h Not a valid EEPROM
4005h Checksum error. A write to EEPROM failed because the EEPROM is invalid.
4006h A checksum read did not match the checksum written.
4007h An unsupported data type was requested from the Non-Volatile Data Manager.
4008h An unsupported data type was requested to be set in Non-Volatile Data Manager
4011h PCA EEPROM missing
4012h PCA EEPROM void
4013h PCA EEPROM corrupt
4014h PCA table invalid
4015h PCA table 1 invalid
4015h A failure occurred while trying to update the Read ERT log in the PCA EEPROM.
4016h PCA table 2 invalid
4016h A failure occurred while trying to update the Write ERT log in the PCA EEPROM.
4017h A failure occurred while trying to update the Write Fault Counters log in the PCA
EEPROM.
4018h A failure occurred while trying to update the Tapes Used logs in the PCA EEPROM.
4021h Head EEPROM absent
4022h Head EEPROM void
4023h Head EEPROM corrupt
4024h Head table invalid
4025h Head table 1 invalid
4026h Head table 2 invalid
4027h Head table 3 invalid
4028h Head table 4 invalid
4031h Mechanism EEPROM absent
4032h Mechanism EEPROM void
4033h Mechanism EEPROM corrupt
4034h Mechanism table invalid
4035h Mechanism table 1 invalid