Filter
Top Products
Drive Error Codes 127
Drive Error Codes
4035h A failure occurred while trying to update the Drive Fault logs in the PCA EEPROM.
4036h Mechanism table 2 invalid
4036h An Algorithm error occurred while trying to update the Drive Fault Logs in the
EEPROM.
4037h Mechanism table 3 invalid
4038h Mechanism table 4 invalid
4039h The Servo Fault could not be logged because of EEPROM access failure.
4041h CM EEPROM absent
4042h CM EEPROM void
4043h The CM could not be written before an unload causing probable corruption in the
CM.
4044h An invalid protected page table was found.
4045h A CRC error was discovered over the unprotected page table.
4046h CM initialized. This is not really an error, it indicates a fresh cartridge.
4047h CM invalid CRC
4048h An invalid CRC over the Cartridge Manufacturers Information page was found.
4049h An invalid CRC over the Media Manufacturers Information page was found.
404Ah An invalid CRC over the Initialization Data page was found.
404Bh An initialization table was request to be created for a CM with a valid initialization
table in it.
404Ch A failure occurred while trying to add a page descriptor to the unprotected page
table.
404Dh An unprotected page table entry was attempted with an invalid page ID.
4050h An access to the tape directory was requested before it was read from the CM.
4051h A CRC error was detected in the tape directory while being read.
4052h Data for an illegal wrap section was requested from the tape directory.
4053h The Buffer Manager does not have enough CRAM to hold the CM.
4054h The write-protect operation was aborted because of a bogus initialization data
address in CRAM.
4060h An access to a non-existent EOD page was attempted.
4061h An invalid CRC over the EOD page was found.
4062h An access to a non-existent Initialization page was attempted.
4070h An access to a non-existent Tape Write Pass page was attempted.
Error Description