Filter
Top Products
116 Drive Error Codes
Drive Control (from 1C00h)
1840h Power-on self-test failed the DRAM MPU Port test
1841h Power-on self-test failed the DRAM Data Bus test
1842h Power-on self-test failed the DRAM Addr Bus test
1843h Power-on self-test failed the Gen 1 Formatter ASIC Register test
1844h Power-on self-test failed the Gen 1 Formatter ASIC built-in self-test)
1845h Power-on self-test failed the Firmware Image Checksum
1846h Power-on self-test failed the CRAM Data Bus test
1847h Power-on self-test failed the CRAM Address Bus test
1848h Power-on self-test failed the Generation 1 SCSI ASIC Register test
1849h Power-on self-test failed the Generation 1 SCSI ASIC Buffer Data Bus test
184Ah Power-on self-test failed the Generation 1 SCSI ASIC Buffer Address Bus test
Code Description
1C00h Bad cartridge type. Attempted to load a cartridge of a type that drive control cannot
handle.
1C01h Attempted to unload a cartridge when Prevent Medium Removal is on.
1C02h There is no firmware image available for upgrade.
1C03h Firmware image is incomplete.
1C04h Firmware image has checksum or other errors.
1C05h Firmware image is not compatible with the drive configuration.
1C06h Firmware image is too big to upgrade from.
1C07h Internal error in the Drive Control firmware upgrade code.
1C08h A firmware upgrade cartridge was in the drive when it powered on.
1C09h A load without threading has been requested for a cartridge with unusable Cartridge
Memory.
1C0Ah Tried to load a writable cartridge with an unusable Cartridge Memory.
1C0Bh The write-protect tab setting was changed during a load.
1C0Ch A non-HP cleaning cartridge has been inserted in the drive.
1C0Dh Cannot determine the manufacturer of the cleaning cartridge.
1C0Eh No DRAM space reserved to hold the firmware image.
1C0Fh A cleaning cartridge was in the drive when it powered on.
Code Description