Filter
Top Products
136 Drive Error Codes
74A6h RD stopped toggling while CG during ungrab
74A7h RD stopped toggling while LP during ungrab
74A8h RD stopped toggling while CD during ungrab
74A9h RD stopped toggling while CD during unload
74AAh RD stopped toggling while IT during unload
74ACh Too much rotation of the cartridge was detected while the tape was not threaded
74ADh The load, unload, grab or ungrab operation timed out.
74C0h Time-out while deslacking the cartridge
74C1h Emergency stop error
74C2h Already past target position
74C3h Set speed time-out error
74C4h Time-out waiting for an LPOS
74C5h Fatal reel fault error
74C6h Safety lit stop reached
74C7h LPOS calculation with invalid LP0
74C8h Missed target position
74C9h Previous tape motion command in progress
74CBh Unthreading time-out error
74CCh Remove slack process timed-out
74CDh Leader may have disconnected
74CEh Time-out waiting for radii estimate
74CFh Radii estimation process failed
74D1h Invalid cartridge type
74D2h Cal reel driver offset time-out
74D3h Time-out waiting for the specified event
74D4h Front-reel motor hall sensor fault
74D5h Back-reel motor hall sensor fault
74D6h The deslacking process timed out and did not complete, probably because the back
reel motor failed to rotate.
74D7h Threading time out while waiting for half moon to pass the first roller.
74D8h Timed out waiting for tape to reach position for speed-up during a thread.
74D9h Time out while waiting for tape to reach the position to stop threading.
Error Description