Filter
Top Products
Parameter Settings for Keypad Entry
Appendix C
C–4
A032 Multi-speed 12 setting 0.00 0.00 0.00
A033 Multi-speed 13 setting 0.00 0.00 0.00
A034 Multi-speed 14 setting 0.00 0.00 0.00
A035 Multi-speed 15 setting 0.00 0.00 0.00
A038 Jog frequency setting 1.00 1.00 1.00
A039 Jog stop mode 00 00 00
A041 Torque boost method selection 00 00 00
A241 Torque boost method selection, 2nd
motor
00 00 00
A042 Manual torque boost value 1.0 1.0 1.0
A242 Manual torque boost value, 2nd
motor
1.0 1.0 1.0
A43 Manual torque boost frequency
adjustment
5.0 5.0 5.0
A243 Manual torque boost frequency
adjustment, 2nd motor
5.0 5.0 5.0
A44 V/F characteristic curve selection,
1st motor
00 01 00
A244 V/F characteristic curve selection,
2nd motor
00 01 00
A045 V/f gain setting 100. 100. 100.
A051 DC braking enable 00 00 00
A052 DC braking frequency setting 0.50 0.50 0.50
A053 DC braking wait time 0.0 0.0 0.0
A054 DC braking force during
deceleration
0. 0. 0.
A055 DC braking time for deceleration 0.0 0.0 0.0
A056 DC braking / edge or level detection
for [DB] input
01 01 01
A057 DC braking force for starting 0. 0. 0.
A058 DC braking time for starting 0.0 0.0 0.0
A059 DC braking carrier frequency setting 3.0 3.0 3.0
A061 Frequency upper limit setting 0.00 0.00 0.00
A0261 Frequency upper limit setting, 2nd
motor
0.00 0.00 0.00
A062 Frequency lower limit setting 0.00 0.00 0.00
A0262 Frequency lower limit setting, 2nd
motor
0.00 0.00 0.00
“A” Group Parameters Default Setting
User
Setting
Func.
Code
Name
-FE2 (Europe) -FU2 (USA) -FR (Japan)