Filter
Top Products
L300P Inverter
Appendix C
C–5
A063,
A065,
A067
Jump (center) frequency setting 0.00 0.00 0.00
A064,
A066,
A068
Jump (hysteresis) frequency width
setting
0.50 0.50 0.50
A069 Acceleration stop frequency setting 0.00 0.00 0.00
A070 Acceleration stop time frequency
setting
0.0 0.0 0.0
A071 PID Function Enable 00 00 00
A072 PID proportional gain 1.0 1.0 1.0
A073 PID integral time constant 1.0 1.0 1.0
A074 PID derivative gain 0.0 0.0 0.0
A075 PV scale conversion 1.00 1.00 1.00
A076 PV source setting 00 00 00
A081 AVR function select 00 00 02
A082 AVR voltage select 230/400 230/460 200/400
A085 Operation mode
selection
00 00 00
A086 Energy saving mode tuning 50.0 50.0 50.0
A092 Acceleration (2) time setting 15.0 15.0 15.0
A292 Acceleration (2) time setting, 2nd
motor
15.0 15.0 15.0
A093 Deceleration (2) time setting 15.0 15.0 15.0
A293 Deceleration (2) time setting, 2nd
motor
15.0 15.0 15.0
A094 Select method to switch to Acc2/
Dec2 profile
00 00 00
A294 Select method to switch to Acc2/
Dec2, 2nd motor
00 00 00
A095 Acc1 to Acc2 frequency transition
point
0.0 0.0 0.0
A295 Acc1 to Acc2 frequency transition
point, 2nd motor
0.0 0.0 0.0
A096 Dec1 to Dec2 frequency transition
point
0.0 0.0 0.0
A296 Dec1 to Dec2 frequency transition
point, 2nd motor
0.0 0.0 0.0
A097 Acceleration curve selection 00 00 00
“A” Group Parameters Default Setting
User
Setting
Func.
Code
Name
-FE2 (Europe) -FU2 (USA) -FR (Japan)