Filter
Top Products
L300P Inverter
Configuring Drive
Parameters
3–7
Trip Event and
Programming
Error Monitoring
The trip event and history monitoring feature lets you cycle through related information using
the keypad. See “
Monitoring Trip Events, History, & Conditions” on page 6–5.
Programming errors generate an error code that begins with the special character. See
“
Programming Error Codes” on page 3–60 for more information.
D016 Cumulative operation
RUN time monitor
Displays total time the inverter has
been in RUN mode in hours.
Range is 0 to 9999 / 1000 to 9999/
100 to 999 (10,000 to 99,900) hrs.
—
hours
RUN 0000000hr
D017 Cumulative power-on
time monitor
Displays total time the inverter has
had input power (ON) in hours.
Range is:
0 to 9999 / 100.0 to 999.9 /
1000 to 9999 / 100 to 999 hrs.
—
hours
ON 0000000hr
“D” Function
Run
Mode
Edit
Range
and Units
SRW Display
Func.
Code
Name Description
“D” Function
Run
Mode
Edit
Lo Hi
Range
and Units
SRW Display
Func.
Code
Name Description
D080 Trip Counter Number of trip events — — ERR COUNT 00000
D081
to
D086
Trip monitor 1 to 6 Displays trip event information — — (Trip event type)
D090 Programming error
monitor
Displays programming error code — — XXXX