Filter
Top Products
GVRP Commands
104 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is disabled on all interfaces.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
An access port does not dynamically join a VLAN because it is always a member in only
one VLAN.
Membership in an untagged VLAN is propagated in the same way as in a tagged VLAN.
That is, the PVID is manually defined as the untagged VLAN VID.
Example
The following example enables GVRP on Ethernet port 6.
garp timer
The garp timer Interface Configuration (Ethernet, Port channel) mode command adjusts
the values of the join, leave and leaveall timers of GARP applications. To restore the
default configuration, use the
no form of this command.
Syntax
garp timer {join | leave | leaveall} timer_value
no garp timer
Parameters
• {join | leave | leaveall} — Indicates the type of timer.
Console(config)#
interface ethernet
ext.6
Console(config-if)#
gvrp enable