Filter
Top Products
SNMP Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 245
snmp-server filter
The snmp-server filter Global Configuration mode command creates or updates a Simple
Network Management Protocol (SNMP) server filter entry. To remove the specified
SNMP server filter entry, use the
no form of this command.
Syntax
snmp-server filter filter-name oid-tree {included | excluded}
no snmp-server filter filter-name [oid-tree]
Parameters
• filter-name — Specifies the label for the filter record that is being updated or created.
The name is used to reference the record. (Range: 1-30 characters)
• oid-tree — Specifies the object identifier of the ASN.1 subtree to be included or
excluded from the view. To identify the subtree, specify a text string consisting of
numbers, such as 1.3.6.2.4, or a word, such as system. Replace a single subidentifier
with the asterisk (*) wildcard to specify a subtree family; for example, 1.3.*.4.
• included — Indicates that the filter type is included.
• excluded — Indicates that the filter type is excluded.
Default Configuration
No filter entry exists.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same filter record. Later lines take
precedence when an object identifier is included in two or more lines.
Example
The following example creates a filter that includes all objects in the MIB-II system group
except for sysServices (System 7) and all objects for interface 1 in the MIB-II interfaces
group.
Console(config)#
snmp-server filter
filter-name system
included
Console(config)#
snmp-server filter
filter-name system.7
excluded
Console(config)#
snmp-server filter
filter-name ifEntry.*.1
included