Filter
Top Products
RMON Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 205
The following table describes significant fields shown in the example:
Console#
show rmon history
1
other
Sample Set: 1 Owner: Me
Interface:1 Interval: 1800
Requested samples: 50 Granted samples: 50
Maximum table size: 500
Time Dropped Collisions
-------------------- -------- ----------
Jan 18 2005 21:57:00 3 0
Jan 18 2005 21:57:30 3 0
Field Description
Time Date and Time the entry is recorded.
Octets The total number of octets of data (including those in bad packets) received on
the network (excluding framing bits but including FCS octets).
Packets The number of packets (including bad packets) received during this sampling
interval.
Broadcast The number of good packets received during this sampling interval that were
directed to the broadcast address.
Multicast The number of good packets received during this sampling interval that were
directed to a multicast address. This number does not include packets
addressed to the broadcast address.
Util The best estimate of the mean physical layer network utilization on this
interface during this sampling interval, in hundredths of a percent.
CRC Align The number of packets received during this sampling interval that had a length
(excluding framing bits but including FCS octets) between 64 and 1518 octets,
inclusive, but had either a bad Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with a non-integral number of
octets (Alignment Error).
Undersize The number of packets received during this sampling interval that were less
than 64 octets long (excluding framing bits but including FCS octets) and were
otherwise well formed.
Oversize The number of packets received during this sampling interval that were longer
than 1518 octets (excluding framing bits but including FCS octets) but were
otherwise well formed.