Filter
Top Products
Address Table Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 29
no port security
Parameters
• forward — Forwards packets with unlearned source addresses, but does not learn the
address.
• discard — Discards packets with unlearned source addresses. This is the default if no
option is indicated.
• discard-shutdown — Discards packets with unlearned source addresses. The port is
also shut down.
• seconds — Sends SNMP traps and defines the minimum amount of time in seconds
between consecutive traps. (Range: 1-1000000)Default Configuration
This setting is disabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, port 1 forwards all packets without learning addresses of packets from
unknown sources and sends traps every 100 seconds if a packet with an unknown source
address is received.
port security mode
The port security mode Interface Configuration mode command configures the port
security mode. To restore the default configuration, use the no form of this command.
Syntax
port security mode {lock | mac-addresses}
no port security mode
Console(config)#
interface ethernet
ext.1
Console(config-if)#
port security forward trap
100