Filter
Top Products
Using CLI
2 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
The default host name is Console unless it has been changed using the hostname
command in the Global Configuration mode.
Privileged EXEC Mode
Privileged access is password protected to prevent unauthorized use because many of the
Privileged commands set operating system parameters. The password is not displayed on
the screen and is case sensitive.
Privileged users enter directly into the Privileged EXEC mode. To enter the Privileged
EXEC mode from the User EXEC mode, perform the following steps:
At the prompt enter the enable command and press <Enter>. A password prompt is
displayed.
Enter the password and press <Enter>. The password is displayed as *. The Privileged
EXEC mode prompt is displayed. The Privileged EXEC mode prompt consists of the
device host name followed by #.
To return from the Privileged EXEC mode to the User EXEC mode, use the disable
command. The following example illustrates how to access the Privileged EXEC mode
and return to the User EXEC mode:
The exit command is used to return from any mode to the previous mode except when
returning to the User EXEC mode from the Privileged EXEC mode. For example, the exit
command is used to return from the Interface Configuration mode to the Global
Configuration mode.
Global Configuration Mode
Global Configuration mode commands apply to features that affect the system as a whole,
rather than just a specific interface. The configure Privileged EXEC mode command is
used to enter the Global Configuration mode.
To enter the Global Configuration mode perform the following steps:
1. At the Privileged EXEC mode prompt enter the configure command and press
<Enter>. The Global Configuration mode prompt is displayed. The Global
Console>
Console#
Console> enable
Enter Password: ******
Console#
Console# disable
Console>