Filter
Top Products
Spanning-Tree Commands
268 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example enables shared spanning-tree on Ethernet port 15.
spanning-tree pathcost method
The spanning-tree pathcost method Global Configuration mode command sets the
default path cost method. To return to the default configuration, use the
no form of this
command.
Syntax
spanning-tree pathcost method {long | short}
no spanning-tree pathcost method
Parameters
• long — Specifies port path costs with a range of 1-200,000,000 .
• short — Specifies port path costs with a range of 0-65,535.
Default Configuration
Short path cost method.
Command Mode
Global Configuration mode
User Guidelines
This command is only operational with the device in Interface mode.
This command applies to all spanning tree instances on the device.
The cost is set using the
spanning-tree cost command.
Console(config)# interface ethernet ext.15
Console(config-if)# spanning-tree link-type shared