Filter
Top Products
QoS Commands
194 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 15 to the default trust state.
qos cos
The qos cos Interface Configuration (Ethernet, port-channel) mode command defines the
default CoS value of a port. To return to the default configuration, use the
no form of this
command.
Syntax
qos cos default-cos
no qos cos
Parameters
• default-cos — Specifies the default CoS value of the port. (Range: 0-7)
Default Configuration
Default CoS value of a port is 0.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
If the port is trusted, the default CoS value of the port is used to assign a CoS value to all
untagged packets entering the port.
Console(config)# interface ethernet Ext.15
Console(config-if) qos trust