Filter
Top Products
IP Address Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 127
User Guidelines
It is recommended not to set the timeout value to less than 3600.
Example
The following example configures the ARP timeout to 12000 seconds
.
clear arp-cache
The clear arp-cache Privileged EXEC mode command deletes all dynamic entries from
the ARP cache.
Syntax
clear arp-cache
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example deletes all dynamic entries from the ARP cache.
show arp
The show arp Privileged EXEC mode command displays entries in the ARP table.
Console(config)#
arp timeout
12000
Console#
clear arp-cache