Filter
Top Products
RADIUS Commands
220 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
radius-server deadtime
The radius-server deadtime Global Configuration mode command improves RADIUS
response time when servers are unavailable. The command is used to cause the
unavailable servers to be skipped. To restore the default configuration, use the
no form of
this command.
Syntax
radius-server deadtime deadtime
no rhadius-server deadtime
Parameters
• deadtime — Length of time in minutes during which a RADIUS server is skipped
over by transaction requests. (Range: 0-2000)
Default Configuration
The deadtime setting is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets all RADIUS server deadtimes to 10 minutes.
show radius-servers
The show radius-servers Privileged EXEC mode command displays the RADIUS server
settings.
Console(config)# radius-server deadtime 10