Filter
Top Products
QoS Commands
174 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
User Guidelines
Before configuring policies for classes whose match criteria are defined in a class map,
use the
policy-map Global Configuration mode command to specify the name of the
policy map to be created or modified.
Class policies in a policy map can only be defined if match criteria has already been
defined for the classes. Use the
class-map Global Configuration and match Class-map
Configuration commands to define the match criteria of a class.
Only one policy map per interface per direction is supported. A policy map can be applied
to multiple interfaces and directions.
Example
The following example creates a policy map called policy1 and enters the Policy-map
Configuration mode.
class
The class Policy-map Configuration mode command defines a traffic classification and
enters the Policy-map Class Configuration mode. To remove a class map from the policy
map, use the
no form of this command.
Syntax
class class-map-name [access-group acl-name]
no class class-map-name
Parameters
• class-map-name — Specifies the name of an existing class map. If the class map does
not exist, a new class map will be created under the specified name.
• acl-name — Specifies the name of an IP or MAC ACL.
Default Configuration
No policy map is defined.
Console (config)# policy-map policy1
Console (config-pmap)#