Filter
Top Products
IGMP Snooping Commands
118 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Example
The following example displays IGMP snooping information on VLAN 1000.
show ip igmp snooping groups
The show ip igmp snooping groups Privileged EXEC mode command displays multicast
groups learned by IGMP snooping.
Syntax
show ip igmp snooping groups [vlan vlan-id] [address ip-multicast-address]
Parameters
• vlan-id — Specifies the VLAN number.
• ip-multicast-address — Specifies the IP multicast address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
To see the full multicast address table (including static addresses) use the show bridge
multicast address-table
Privileged EXEC command.
Console#
show ip igmp snooping interface
4
IGMP Snooping is globaly disabled
IGMP Snooping is enabled on VLAN 4
IGMP host timeout is 260 sec
IGMP Immediate leave is disabled. IGMP leave timeout is 10 sec
IGMP mrouter timeout is 300 sec
Automatic learning of multicast router ports is enabled