Filter
Top Products
Address Table Commands
22 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Example
The following example adds a permanent static MAC-layer station source address
3aa2.64b3.a245 on port 1 to the bridge table.
bridge multicast filtering
The bridge multicast filtering Global Configuration mode command enables filtering
multicast addresses. To disable filtering multicast addresses, use the no form of this
command.
Syntax
• bridge multicast filtering
• no bridge multicast filtering
Default Configuration
Filtering multicast addresses is disabled. All multicast addresses are flooded to all ports.
Command Mode
Global Configuration mode
User Guidelines
If multicast devices exist on the VLAN, do not change the unregistered multicast
addresses state to drop on the switch ports.
If multicast devices exist on the VLAN and IGMP-snooping is not enabled, the bridge
multicast forward-all command should be used to enable forwarding all multicast packets
to the multicast switches.
Example
In the folowing example, bridge multicast filtering is enabled.
Console(config)#
interface vlan
2
Console(config-if)#
bridge address
3aa2.64b3.a245
ethernet
ext.1
permanent
Console(config)#
bridge multicast filtering