Filter
Top Products
QoS Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 191
Syntax
qos map policed-dscp dscp-list to dscp-mark-down
no qos map policed-dscp
Parameters
• dscp- list — Specifies up to 8 DSCP values separated by a space. (Range: 0-63)
• dscp-mark-down — Specifies the DSCP value to mark down. (Range: 0-63)
Default Configuration
The default map is the Null map, which means that each incoming DSCP value is mapped
to the same DSCP value.
Command Mode
Global Configuration mode.
User Guidelines
DSCP values 3,11,19… cannot be remapped to other values.
·Example
The following example marks down incoming DSCP value 3 as DSCP value 43 on the
policed-DSCP map.
qos map dscp-queue
The qos map dscp-queue Global Configuration mode command modifies the DSCP to
CoS map. To return to the default map, use the
no form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue
Console(config)# qos map policed-dscp 3 to 43
Reserved DSCP. DSCP 3 was not configured.