Intel SBCEGBESW10 CLI Switch User Manual


 
System Management Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 325
telnet
The telnet User EXEC mode command enables logging on to a host that supports Telnet.
Syntax
telnet {ip-address | hostname} [port] [keyword1......]
Parameters
ip-address — IP address of the destination host.
hostname — Host name of the destination host. (Range: 1-158 characters)
port — A decimal TCP port number, or one of the keywords listed in the Ports table in
the User Guidelines.
keyword — One or more keywords listed in the Keywords table in the User
Guidelines.
Default Configuration
The default port is the Telnet port (decimal23) on the host.
Command Mode
User EXEC mode
User Guidelines
Telnet software supports special Telnet commands in the form of Telnet sequences that
map generic terminal control functions to operating system-specific functions. To enter a
Telnet sequence, press the escape sequence keys (Ctrl-shift-6) followed by a Telnet
command character.
H Host unreachable.
N Network unreachable.
P Protocol unreachable.
Q Source quench.
R Fragment reassembly time exceeded.
S Source route failed.
U Port unreachable.