Filter
Top Products
VLAN Commands
362 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Parameters
• add vlan-list — List of VLAN IDs to be added. Separate nonconsecutive VLAN IDs
with a comma and no spaces. A hyphen designates a range of IDs.
• remove vlan-list — List of VLAN IDs to be removed. Separate nonconsecutive
VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds VLANs 1, 2, 5 to 6 to the allowed list of te Ethernet port 1
switchport trunk native vlan
The switchport trunk native vlan Interface Configuration mode command defines the
native VLAN when the interface is in trunk mode. To return to the default configuration,
use the
no form of this command.
Syntax
switchport trunk native vlan vlan-id
no switchport trunk native vlan
Parameters
• vlan-id— Specifies the ID of the native VLAN.
Console(config)# interface ethernet ext.1
console(config-if)# switchport trunk allowed vlan add 1-2,5-6