Filter
Top Products
System Management Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 331
show sessions
The show sessions User EXEC mode command lists open Telnet sessions.
Syntax
show sessions
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example lists open Telnet sessions.
The following table describes significant fields shown above.
Bob Serial
John SSH 172.16.0.1
Robert HTTP 172.16.0.8
Betty Telnet 172.16.1.7
Console> show sessions
Connection Host Address Port Byte
---------- ------------- ---------- ----- ----
1 Remote device 172.16.1.1 23 89
2 172.16.1.2 172.16.1.2 23 8
Field Description
Connection Connection number.
Host Remote host to which the device is connected through a Telnet session.