Filter
Top Products
SNMP Commands
238 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
User Guidelines
The view-name parameter cannot be specified for su, which has access to the whole MIB.
The
view-name parameter can be used to restrict the access rights of a community string.
When it is specified:
An internal security name is generated.
The internal security name for SNMPv1 and SNMPv2 security models is mapped to an
internal group name.
The internal group name for SNMPv1 and SNMPv2 security models is mapped to a view-
name (read-view and notify-view always, and for
rw for write-view also)
The
group-name parameter can also be used to restrict the access rights of a community
string. When it is specified:
An internal security name is generated.
The internal security name for SNMPv1 and SNMPv2 security models is mapped to the
group name.
Example
The following example defines community access string public to permit administrative
access to SNMP protocol at an administrative station with IP address 192.168.1.20.
snmp-server view
The snmp-server view Global Configuration mode command creates or updates a Simple
Network Management Protocol (SNMP) server view entry. To remove a specified SNMP
server view entry, use the
no form of this command.
Syntax
snmp-server view view-name oid-tree {included | excluded}
no snmp-server view view-name [oid-tree]
Parameters
• view-name — Specifies the label for the view record that is being created or updated.
The name is used to reference the record. (Range: 1-30 characters)
Console(config)# snmp-server community public su 192.168.1.20