Filter
Top Products
Syslog Commands
310 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
logging buffered size
The logging buffered size Global Configuration mode command changes the number of
syslog messages stored in the internal buffer. To restore the default configuration, use the
no form of this command.
Syntax
logging buffered size number
no logging buffered size
Parameters
• number — Specifies the maximum number of messages stored in the history table.
(Range: 20-400)
Default Configuration
The default number of messages is 200.
Command Mode
Global Configuration mode
User Guidelines
This command takes effect only after Reset.
Example
The following example changes the number of syslog messages stored in the internal
buffer to 300.
clear logging
The clear logging Privileged EXEC mode command clears messages from the internal
logging buffer.
Console(config)# logging buffered size 300