Filter
Top Products
VLAN Commands
368 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Default Configuration
The software reserves a VLAN as the internal usage VLAN of an interface.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
An internal usage VLAN is required when an IP interface is configured on an Ethernet
port or port-channel.
This command enables the user to configure the internal usage VLAN of a port. If an
internal usage VLAN is not configured and the user wants to configure an IP interface, an
unused VLAN is selected by the software.
If the software selected a VLAN for internal use and the user wants to use that VLAN as a
static or dynamic VLAN, the user should do one of the following:
• Remove the IP interface.
• Create the VLAN and recreate the IP interface.
• Use this command to explicitly configure a different VLAN as the internal usage
VLAN.
Example
The following example reserves an unused VLAN as the internal usage VLAN of ethernet
port 1.
show vlan
The show vlan Privileged EXEC mode command displays VLAN information.
Syntax
show vlan [id vlan-id | name vlan-name]
Parameters
• vlan-id — specifies a VLAN ID
Console# config
Console(config)# interface ethernet ext.1
Console(config-if)# ip internal-usage-vlan