Filter
Top Products
Ethernet Configuration Commands
80 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Syntax
interface range ethernet {port-list | all}
Parameters
• port-list — List of valid ports. Where more than one port is listed, separate the
nonconsecutive ports with a comma and no spaces, use a hyphen to designate a range
of ports and group a list separated by commas in brackets.
• all — All Ethernet ports.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each active
interface in the range. If the command returns an error on one of the active interfaces, it
does not stop executing commands on other active interfaces.
Example
The following example shows how ports 10 to 12 and 1 to 14 are grouped to receive the
same command.
shutdown
The shutdown Interface Configuration (Ethernet, port-channel) mode command disables
an interface. To restart a disabled interface, use the
no form of this command.
Syntax
shutdown
no shutdown
Console(config)#
interface range ethernet
10-12,1-14
Console(config-if)#