Filter
Top Products
IGMP Snooping Commands
114 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
User Guidelines
The timeout should be at least greater than 2*query_interval+max_response_time of the
IGMP router.
Example
The following example configures the host timeout to 300 seconds.
ip igmp snooping mrouter-time-out
The ip igmp snooping mrouter-time-out Interface Configuration (VLAN) mode
command configures the mrouter-time-out. The
ip igmp snooping mrouter-time-out
Interface Configuration (VLAN) mode command is used for setting the aging-out time
after multicast device ports are automatically learned. To restore the default configuration,
use the
no form of this command.
Syntax
ip igmp snooping mrouter-time-out time-out
no ip igmp snooping mrouter-time-out
Parameters
• time-out — Specifies the Multicast device timeout in seconds (Range: 1-2147483647)
Default Configuration
The default value is 300 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Console(config)#
interface vlan
2
Console(config-if)#
ip igmp snooping host-time-out
300