Filter
Top Products
VLAN Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 377
map subnet subnets-group
Use the map subnet subnets-group VLAN configuration command to map IP subnet to a group of
IP subnets. Use the no form of this command to delete the map.
Syntax
map subnet ip-address prefix-mask subnets-group group
no map subnet ip-address prefix-mask
Parameters
• ip-addressSpecify the IP address prefix of the subnet to be entered to the group.
• prefix-maskMask bits. The format is IP address format.
• group Group number
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the device as a virtual terminal for remote console access.
switchport general map subnets-group vlan
Use the switchport general map subnets-group vlan interface configuration command to set a
subnet-based classification rule. Use the no form of this command to delete a classification.
Syntax
switchport general map subnets-group group vlan vlan-id
Console(config)#
line telnet
Console(config-line)#