Filter
Top Products
QoS Commands
192 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Parameters
• dscp-list — Specifies up to 8 DSCP values separated by a space. (Range: 0 - 63)
• queue-id — Specifies the queue number to which the DSCP values are mapped.
Default Configuration
The following table describes the default map.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
qos trust (Global)
The qos trust Global Configuration mode command configures the system to the basic
mode and trust state. To return to the untrusted state, use the
no form of this command.
Syntax
qos trust {cos | dscp}
no qos trust
Parameters
• cos — Indicates that ingress packets are classified with packet CoS values. Untagged
packets are classified with the default port CoS value.
• dscp — Indicates that ingress packets are classified with packet DSCP values.
DSCP value 0-7 8-15 16-23 24-31 32-39 40-47 48-56 57-63
Queue-ID 1 2 3 4 5 6 7 8
Console(config)# qos map dscp-queue 33 40 41 to 1