Filter
Top Products
QoS Commands
170 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Example
The following example displays the DSCP port-queue map.
The following table describes the significant fields shown above.
class-map
The create-map Global Configuration mode command creates or modifies a class map
and enters the Class-map Configuration mode. To delete a class map, use the
no form of
this command.
Syntax
class-map class-map-name [match-all | match-any]
no class-map class-map-name
Parameters
• class-map-name — Specifies the name of the class map.
• match-all — Checks that the packet matches all classification criteria in the class map
match statement.
Console> show qos map
Dscp-queue map:
d1:d20123456789
--:----------------------
0 : 01 01 01 01 01 01 01 01 01 01
1 : 01 01 01 01 01 01 02 02 02 02
2 : 02 02 02 02 02 02 02 02 02 02
3 : 02 02 03 03 03 03 03 03 03 03
4 : 03 03 03 03 03 03 03 03 04 04
5 : 04 04 04 04 04 04 04 04 04 04
6 : 04 04 04 04
Column Description
d1 Decimal Bit 1 of DSCP
d2 Decimal Bit 2 of DSCP
01 - 04 Queue numbers