Filter
Top Products
Ethernet Configuration Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 83
User Guidelines
The no speed command in a port-channel context returns each port in the port-channel to
its maximum capability.
Example
The following example configures the speed operation of Ethernet port 5 to 100 Mbps
operation.
duplex
The duplex Interface Configuration (Ethernet) mode command configures the full/half
duplex operation of a given Ethernet interface when not using auto-negotiation. To restore
the default configuration, use the
no form of this command.
Syntax
duplex {half | full}
no duplex
Parameters
• half — Forces half-duplex operation
• full — Forces full-duplex operation
Default Configuration
The interface is set to full duplex.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
When configuring a particular duplex mode on the port operating at 10/100 Mbps, disable
the auto-negotiation on that port.
Half duplex mode can be set only for ports operating at 10 Mbps or 100 Mbps.
Console(config)#
interface ethernet
ext.5
Console(config-if)#
speed 100